Syslog Server Configuration - Sena PS110 User Manual

Table 3-2 Input examples of Option and IP address/mask combination
Allowable Hosts
Any host
192.168.1.120
Any host except
192.168.1.120
192.168.1.1 ~
192.168.1.254
192.168.0.1 ~
192.168.255.254
192.168.1.1 ~
192.168.1.126
192.168.1.129 ~
192.168.1.254
None

3.6. SYSLOG server configuration

The Pro Series supports a remote message logging service, SYSLOG service for the system and port
data logging. To use the remote SYSLOG service, the user must specify the SYSLOG server's IP
address and the facility to be used. Figure 3-9 shows the SYSLOG server configuration page of the
supplied Web interface.
To receive log messages from the Pro Series, the SYSLOG server must be configured as "remote
reception allowed". If there is a firewall between the Pro Series and the SYSLOG server, there must
be a rule that allows all outgoing and incoming UDP packets to travel across the firewall.
The Pro Series supports SYSLOG facilities from local0 to local7. The user can employ these
facilities to save messages from the Pro Series separately in the SYSLOG server.
Input format
IP address/mask
0.0.0.0/0.0.0.0
192.168.1.120/255.255.255.255
192.168.1.120/255.255.255.255
192.168.1.0/255.255.255.0
192.168.0.0/255.255.0.0
192.168.1.0/255.255.255.128
192.168.1.128/255.255.255.128
0.0.0.0/0.0.0.0
Figure 3-9 SYSLOG server configuration
35
Option
Normal
Normal
Invert
Normal
Normal
Normal
Normal
Invert