Operation; Pre-Ride Inspection - Honda SH300 Owner's Manual

OPERATION

PRE-RIDE INSPECTION

For your safety, it is very important to take a
few moments before each ride to walk
around your scooter and check its
condition. If you detect any problem, be
sure you take care of it or have it repaired
by your Honda dealer.
n WARNING
Improperly maintaining this scooter or
failing to correct a problem before riding
can cause a crash in which you can be
seriously hurt or killed.
Always perform a pre-ride inspection
before every ride and correct any
problems.
1. Engine oil level - add engine oil if require
(page 38). Check for leaks.
2. Fuel level - fill fuel tank when necessary
(page 35). Check for leaks.
3. Coolant level - add coolant if required.
Check for leaks (pages 32-33).
4. Front and rear brakes - check operation;
make sure there is no brake fluid leakage
(pages 27-31).
5. Tyres - check condition and pressure
(pages 39-44).
6. Throttle - check for smooth opening and
full closing in all steering positions.
61