Abs Indicator Light (Sh300A/Ar) - Honda SH300 Owner's Manual

ABS Indicator Light (SH300A/AR)

This indicator normally illuminates when the
ignition switch is set to ON and is extingui-
shed when the scooter is ridden at a speed of
more than 10 km/h (6 mph) .If there is a pro-
blem with the ABS system, this light flashes
and remains on. When the indicator light is
illuminated the ABS system is not operative.
If the ABS indicator illuminates while
travelling, stop the scooter in a safe place
and switch off the engine.
Return the ignition switch to ON. The
indicator should illuminate and then switch
off after the scooter has been ridden at a
speed of more than 10 km/h (6 mph). If the
indicator fails to switch off, this means the
ABS system is not working, although the
normal braking system will continue to work
and supply the normal stopping power. In
these conditions however the system
should be checked over by an authorized
Honda dealer as soon as possible.
The ABS indicator may illuminate if the rear
wheel is driven at high speed for more than
30 seconds when the scooter is upright on
the stand. This reaction is perfectly normal.
Set the ignition switch to OFF and then
return it to ON. The indicator light should
illuminate and then switch off after the
scooter has been ridden at a speed of more
than 30 km/h (19 mph).
29