SPARK PLUG
Refer to the Safety Precautions on page 79.
Recommended plug:
Standard:
LMAR8A-9 (NGK)
NOTICE
Never use a spark plug with an improper
heat range. Severe engine damage could
result.
(2)
(1) Maintenance lid
(1)
(2) Screws
1. Remove the maintenance lid (1) by
removing the two screws (2).
2. Disconnect the spark plug cap (3) from
the spark plug.
3. Clean any dirt from around the spark plug
base. Remove the spark plug using the
plug wrench furnished in the tool kit.
4. Discard the spark plug.
(3) Spark plug cap
(3)
97