Exclude/Delete Z-Wave Devices; Exclude/Delete A Honeywell Thermostat - Honeywell Tuxedo User Manual

Exclude/Delete Z-Wave Devices

Exclude a Light, Switch or Outlet Module
To exclude a light, switch or outlet module from the Z-Wave network, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the "Home"
screen and then press Z-Wave Setup icon to
display the "Z-Wave Device Management" screen.
2. At the device module:
a) Press the Function Key to exclude the device
from the keypad.
Exclude/Delete a Door Lock
To exclude a door lock module from the Z-Wave network, do the following:
ICON
1. From the "Home" screen, press the Automation
icon and the Z-Wave Setup icon. The "Z-Wave
Device Management" screen is displayed.
2. Highlight the device to exclude and press the Z-
Wave Exclude/Delete icon.
3. On the device press the Function Key to
exclude the device from the keypad.

Exclude/Delete a Honeywell Thermostat

IMPORTANT: Honeywell is not responsible for property damages due to improper setting of the thermostat modes.
To exclude a Honeywell Thermostat from the Z-Wave network, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the "Home"
screen, and then press the Z-Wave Setup icon.
2. At the thermostat:
a) Follow the instructions in the thermostat
Installation Guide under "Installer setup" to
"Remove a Z-Wave Network Connection".
b) Press Done; the thermostat is excluded.
Automation (cont'd)
ACTION
ACTION
ACTION
Z-Wave Exclude/Delete -clears the node from the keypad and
resets device to the default setting.
Notes:
•
If the device is not excluded, refer to the "Z-Wave
Troubleshooting" section.
•
To remove a defective device, refer to the Z-Wave
Troubleshooting section.
NOTES
Z-Wave Exclude/Delete -clears the node from the keypad and resets device
to the default setting.
Notes:
• If the device is not excluded, refer to "Z-Wave Troubleshooting".
• When excluding the door lock, the user code associated with the
door lock will remain in the system. If needed refer to the panel
Installation Instructions on how to remove this user code.
• To remove a defective device, refer to the section on
Troubleshooting.
Z-Wave Exclude/Delete -clears the node from the keypad and resets
device to the default setting.
Note: To remove a defective device, refer to the "Z-Wave
Troubleshooting" section.
36
NOTES
NOTES