Remove/Delete Z-Wave Devices; Remove/Delete A Honeywell Thermostat - Honeywell Tuxedo Touch User Manual

Remove/Delete Z-Wave Devices

Remove a Light, Switch or Outlet Module
To remove a light, switch or outlet module from the Z-Wave network, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen and then press Z-Wave
Setup icon to display the "Z-Wave
Device Management" screen.
2. At the device module:
a) Press the Function Key to remove the
device from the keypad.
Remove/Delete a Door Lock
To remove a door lock module from the Z-Wave network, do the following:
ICON
1. From the "Home" screen, press the
Automation icon and the Z-Wave Setup
icon. The "Z-Wave Device Management"
screen is displayed.
2. Highlight the device to remove and press
the Z-Wave Remove/Delete icon.
3. On the device press the Function Key to
remove the device from the keypad.

Remove/Delete a Honeywell Thermostat

IMPORTANT: Honeywell is not responsible for property damages due to improper setting of the thermostat modes.
To remove a Honeywell Thermostat from the Z-Wave network, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the
"Home" screen, and then press the
Z-Wave Setup icon.
2. At the thermostat:
a) Follow the instructions in the thermostat
Installation Guide under "Installer setup"
to "Remove a Z-Wave Network
Connection".
b) Press Done; the thermostat is removed.
Automation (cont'd)
ACTION
ACTION
Z-Wave Remove/Delete -clears the node from the keypad and resets device
to the default setting.
Notes:
ACTION
Z-Wave Remove/Delete -clears the node from the keypad and resets device
to the default setting.
Note: To remove a defective device, refer to the " Z-Wave Troubleshooting "
section.
NOTES
Z-Wave Remove/Delete -clears the node from the keypad and resets device
to the default setting.
Notes:
•
If the device is not removed, refer to the " Z-Wave Troubleshooting "
section.
•
To remove a defective device, refer to the Z-Wave Troubleshooting
section.
NOTES
• If the device is not removed, refer to "Z-Wave Troubleshooting".
• When removing the door lock, the user code associated with the door
lock will remain in the system. If needed refer to the panel Installation
Instructions on how to remove this user code.
• To remove a defective device, refer to the section on Troubleshooting .
NOTES
37