Time/Date Setup; Setting Daylight Savings Time; Setting Current Time And Date - Honeywell Tuxedo User Manual

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
• When the time is set it is stored in the keypad and sent to the control panel when you press the Apply icon and answer Yes
to the following prompt. Additionally, when using the keypad with a residential panel, the panel downloads its time into the
keypad once an hour after the clock is set.
If Get Time is pressed, the keypad downloads the time and date from the control panel and exits the Set Time & Date
•
screen.
Note: This icon ( ) appears with residential panels and may not appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time do the following:
ICON
1. Press the Setup and System Setup icons.
2. Press the Time/Date Setup icon; enter your Authorized Code.
3. Press the DST icon if you want daylight savings time to affect
your system clock.
4. Set the "Start DST" time and then the "End DST" time by
pressing the Month, Weekend and Hour that you want DST to
start.
5. APPLY saves the settings.

Setting Current Time and Date

To set the current time, do the following:
ICON
1. Press the Time/Date Setup icon; enter your Authorized Code.
2. Press the Month "arrow", and select the current month.
3. Press the Year that is being displayed and enter the current year.
4. Press the Hour that is being displayed and enter the current
hour.
5. Press the Minutes that is being displayed and enter the current
minute.
6. Press AM or PM. (Each depression switches the AM/PM display).
7. Press the MMDDYY "arrow", and select a format for which you
want the year to be displayed.
8. Press Apply.
User System Setup
ACTION
ACTION
31
NOTES
If DST On (Daylight Savings Time) is selected, the
keypad adjusts for Daylight Savings time at the month,
.
week and time chosen
Make sure "DST On" is checked to enable this feature.
NOTES
After each selection the window closes automatically
and the selection is displayed.
Select if you want a 12-hour or 24-hour format for your
time display by pressing the circle to the left of the 12
Hour display.
A confirmation screen displays:
Time Setting Confirmation
Set time on the security system as well?
Yes or No
Yes saves the time changes in your security system.
No saves the changes to the keypad only.
Note: A Yes response is recommended.