Honeywell Tuxedo User Manual page 22

Network Connections
To set up network connections, from the "Home" screen, and do the following:
ICON
1. At the Tuxedo Touch keypad:
a) Press the Setup and IP Setup icon.
2. Select a type of network connection
WIFI ON and go to that section below for further
information.
Setup a LAN Connection
From the IP Setup screen, add a LAN network connection as follows:
ICON
1. At the Tuxedo Touch keypad:
a) Press the LAN ON button.
- Connect an Ethernet cable between the router
and the keypad; the IP address and default
gateway address of the router is displayed.
- If the IP address is not displayed, change the
"Internet Connection Type" to Static to
manually enter the IP address from your
router onto the keypad. Highlight each field
and enter the required information on the
"Data Entry Keyboard" for Subnet Mask,
Default Gateway, DNS Server and Port #;
press GO.
2. Press the Save icon; the IP information will
automatically update.
3. At your PC, Smart Phone or Tablet browser,
start your browser and enter your IP Address.
Web Server/Hosting is not Listed for use in UL installations. Remote arming/disarming/programming is not to be used in UL
U L
Listed Installations.
Setup (cont'd)
ACTION
LAN ON or
:
ACTION
22
NOTES
A pop-up window displays the message:
Save the Change
Select Yes to save the settings.
NOTES
A pop-up window displays:
This will switch off WLAN Network, do you want to continue? Yes
or No
Use the Data Entry Keyboard to enter the required information.
• Press the "up arrow" to switch to capital letters.
• Press the Space key to add a space between characters.
•
Press the x key to delete/backspace.
•
Press the ABC/123 key to switch between numerals and
symbols/characters.
•
Press GO to return to the IP Setup screen.
Note: To change the default port number (6280), press the field next to
port number and on the data entry keyboard enter a secondary port
number between 5000-65534. Press GO and then press Save.
A pop-up window displays:
Success Network Details Saved
Port number changed. Keypad is going to reset
The keypad will reboot with the newly configured port number.