Honeywell Tuxedo User Manual page 27

ICON
5. If the camera information is not automatically
obtained, press the Add icon to manually enter
information on the "Add Camera" screen.
6. To edit camera information, highlight the
camera name and press the Edit icon; the "Edit
Camera Settings" screen is displayed.
a) To retrieve camera settings and connect to the
camera, press the Camera Settings icon, or
b) Highlight each field to enter new information
on the "Data Entry Keyboard" and use the
up/down arrows to change settings.
c) Press Save or Reset.
7. When all cameras have been added, press the
CAMERA WIFI icon and enter the camera
wireless settings from your router.
8. Press the APPLY TO ALL button to set cameras
to wireless operation. If camera does not have
wireless capability, leave it connected to router.
9. Press the Save or Reset icon.
Setup Icons
ADD DELETE
DISCOVER
EDIT
Notes:
• To use the Pan/Tilt feature in Quad View, select the camera name from the camera list and then press Pan/Tilt.
• Press the Quad View icon to enter quad mode. Select a quadrant area on the screen (this area is highlighted) and then select the camera that you
want to appear in that quadrant.
U L
Camera functionality is supplementary only and has not been evaluated by UL.
Multi-Media (cont'd)
ACTION
DELETE
CAMERA
SETTINGS
ALL
WIFI
NOTES
Enter the appropriate wireless information for SSID, Security Mode,
N/W type, Domain and Channel.
"WARNING: Make sure the cameras are connected via Ethernet with
a Cat 5/6 cable".
On the "Edit or Add Camera Settings" screen, enter the appropriate
information (NAME, IP Address, RTSP, MJPEG, MOBILE, RTSP
PORT#, MODEL, USER NAME, PASSWORD, RESOLUTION, FRAME
RATE, HTTP Port#) if known.
A pop-up window displays:
For remote camera viewing service, please contact your alarm company
TM
and ask for Total Connect service and provide this camera's MAC ID
‹00c0027fcd15›. Press Continue to prepare the camera for Total Connect
service.
Press CONTINUE or CANCEL.
Security System information for WEP enter Disabled, WPA personal,
WPA2 personal, and WEP Key.
For WPA PSK TKIP, WPA PSK, AES, and WPA2 PSK AES, enter the
Shared Key using the Data Entry keyboard and press OK.
A pop-up window displays "cam (name) wireless set OK", if successful.
Or, "cam (name) wireless set Failed".
The Cat5/6 cable can now be removed for the wireless cameras and once
power has been recycled to the camera you can view wirelessly via the
Tuxedo Touch Keypad.
Press the Reset icon; the Pop-up window displays "Do you want to reset
the camera?" Select Yes or No.
Camera Icons
Quad
Play
Auto Pan
View
27
Back
Pan/Tilt
Full View