Editing Z-Wave Device Names - Honeywell Tuxedo User Manual

ICON
2. At the Z-Wave thermostat:
a) Select Thermostat; set Time/Date.
b) Follow the instructions in the thermostat
Installation Guide for
"Z-Wave enrollment".
c) To complete inclusion, press Done.
d) Press Exit to return to normal operation.
3. At the Tuxedo Touch Keypad:
a) To verify activation, press the Back icon and
wait 30 seconds. Press the Refresh icon; the
new device is displayed.
U L
Access control functionality has not been evaluated by UL and may not be used in UL Listed applications.

Editing Z-Wave Device Names

Edit a Device Module Name
To edit a device name, do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon from the "Home"
screen and press the Z-Wave Setup icon to
display the "Z-Wave Device Management"
screen.
b) Highlight the device name and press the Z-
Wave Edit icon.
c) On the "Data Entry" keyboard, press Clear
and enter a new name.
d) Press OK.
Automation (cont'd)
ACTION
ACTION
NOTES
The keypad displays a series of messages:
"Please press function key on device"
"Adding Controller Unit"
"Adding Slave Unit"
"Device added successfully"
NOTES
Enter the new device name on the data entry keyboard.
Notes:
• Use the Shift icon for capital letters.
• Use the BS (Backspace) icon to make corrections.
The @#$ icon is not available for use at this time.
35