Checking Once Every Six Months; Feed Roller On Paper Feed Side - Epson SL-D3000 Operation Manual

Checking Once Every Six Months

Feed Roller on Paper Feed Side

Tip:
Only the Dual Roll Model supports front roll paper. For the Single Roll Model, information is not displayed under the
front paper item. See the information for rear roll paper.
Check that no paper particles are stuck to the prints. If there are any paper particles, use the Cleaning Sheet.
After removing the Spindle unit from the rear roll paper feeder and inserting the Cleaning Sheet into the Paper feed
slot, peel off the adhesive tape. Slide the bottom edge of the Cleaning Sheet into the printer, and then close the rear
roll cover. For the Single Roll Model, cleaning starts at this point. For the Dual Roll Model, push down the front roll
paper feeder to its former position to start cleaning automatically.
Checking Items and Checking Times
112