Front Roll Paper Feeder/Rear Roll Paper Feeder - Epson SL-D3000 Operation Manual

Front Roll Paper Feeder/Rear Roll Paper Feeder

Tip:
Only the Dual Roll Model supports front roll paper. For the Single Roll Model, see the information for rear roll paper.
A
Open the cover of the roll paper feeder with the lit Paper status light.
For the front roll paper feeder, pull the lever on the front roll paper feeder, and open the front roll cover.
When using the rear roll paper feeder, open the rear roll cover. For the Dual Roll Model, while holding down
the handle of the front roll paper feeder a little, press the Lock Release button, raise the front roll paper feeder,
and then open the rear roll cover.
B
Cut the paper with a pair of scissors.
Cut it as straight as possible.
Note:
After cutting paper, do not pull the paper that remains inside the printer. Use the following procedure to remove
paper from inside the printer.
For the rear roll paper feeder
Troubleshooting
129