Paper Feed Section; Notes When Loading Paper; Replacing Paper In The Rear Roll Paper Feeder; Removing Paper - Epson SL-D3000 Operation Manual

Paper Feed Section

The configuration for the paper feed section of the printer changes depending on the model. Although all models
are equipped with a rear roll paper feeder, only the Dual Roll Model is equipped with a front roll paper feeder. Also,
the type of paper supported and the capacity differs for each type of feeder as shown in the following table.
Paper Feed Section
Front roll paper feeder
Rear roll paper feeder

Notes when Loading Paper

O When using the paper for the first time after purchase, we recommend cutting off approximately 3 ft (1 meter)
before use. Depending on the paper's transportation environment, the print quality may decline for this first
part of the paper.

Replacing Paper in the Rear Roll Paper Feeder

Removing Paper

A
Prepare the following items.
Items
New paper for loading
A linen or vinyl cloth
Gloves
Replacing Paper
Supported Paper Types
Professional Photo Paper Glossy
Professional Photo Paper Luster
Professional Photo Paper Glossy
Professional Photo Paper Luster
You can load the following genuine Epson paper in the rear roll paper feeder.
Professional Photo Paper Glossy
Professional Photo Paper Luster
To avoid soiling the paper, place the Spindle unit on the cloth when loading/removing
the paper.
Wear gloves to avoid soiling the paper when handling it.
36
Available Paper Width
4 to 8 inches
(102 to 203 mm)
4 to 12 inches
(102 to 305 mm)
Explanation