Head Cleaning - Epson SL-D3000 Operation Manual

Head Cleaning

This function allows you to check the status of the Print Head Unit and clear any clogged nozzles. If any Print Head
Unit nozzles are clogged, there may be streaks in the prints or there may be a difference in color. If you notice any
of these problems, perform Auto Cleaning (0311) to clean the head.
Note:
If nozzles are still clogged after performing Auto Cleaning (0311) several times, you need to perform a Nozzle Check
(0312) and clean the head. See the "SL-D3000 Administrator's Guide" for more information on using Auto Cleaning
(0311) and Nozzle Check (0312) correctly.
Auto Cleaning
If clogging is detected while checking the status of the Print Head Unit, cleaning is performed automatically.
A
Click Settings/Maintenance on the SL-D3000 Maintenance Utility screen.
Tip:
The Settings/Maintenance screen opens when you click Settings/Maintenance on the Printer Information screen.
Setup and Maintenance
92