If The Roll Paper Jams Or Feeds Incorrectly - Epson Stylus Photo 890 Basic Manual

10. Make sure the output tray is open but the extensions are closed, and leave ample
room at the front of the printer for your paper to eject smoothly.
11. Gently hold the paper in place on the top as you press and release the z roll
paper button to feed the paper into the printer.
Don't force the paper to feed into the printer. Allow the paper to
move automatically.
Make sure to press the z roll paper button when you feed roll
paper. Pressing the
paper feeding problems.

If the Roll Paper Jams or Feeds Incorrectly

If the paper feeds incorrectly, do the following:
1. Press the z roll paper button for three seconds to rewind the paper. (You may
have to do this more than once to rewind the paper completely.)
If the paper is jammed and won't rewind, turn the printer off. Then cut the roll at
a point a few inches after it exits the printer. Make your cut as straight as possible
to avoid further feeding problems. Gently pull the roll backward to rewind it, and
then turn the printer on again.
Don't force the printer mechanism. If gentle pulling doesn't move the
paper, contact EPSON. See page 96 for contact information.
b
maintenance button by mistake may cause
45