Epson Stylus Photo 890 Basic Manual page 68

12. Click
Print
no space on the sides. Follow the steps on page 70 to remove and store your
pictures.
Printing Snapshots with Photoshop LE
First load your 4-inch wide roll paper, as described on page 42. Then follow the steps
in the section for your operating system below.
Windows Instructions
1. Start Photoshop. Click
, and select
Edition
Photoshop main screen.
2. Select the picture you want to print, modify it as necessary, and size it to 4 × 6
inches. (See Photoshop help for instructions.)
3. When you're ready to print, select
4. Click
Setup
dialog box.
5. Select either
setting, depending on what type of roll paper you've loaded. See page 37 for
details about selecting the correct Media Type.
6. Click
OK
62
to begin printing. Your pictures print with no space between them and
The printer pauses for a few seconds between printing each photo.
Don't cancel the print job or try to pull the roll toward the output tray;
wait for the printer to resume printing.
Adobe Photoshop LE only comes with the EPSON Stylus
Photo 1280.
, point to
Start
Adobe Photoshop 5.0 Limited Edition
, and then click
Properties
Premium Glossy Photo Paper
.
,
Programs Adobe
from the File menu.
Print
. You see the printer software Properties
or
Photo Paper
,
Photoshop 5.0 Limited
. You see the
as the Media Type