Table of Contents
Advertisement
Figure 15: Installing the Switch into an HP Rack System/E or HP Rack System/U
Rack
Left Front Rack Column
5.
Attach the other switch rail to the other rear rack column in the same
way.
6.
Use the T25 driver in a couple of passes to tighten all six screws that
you installed in the rack columns.
Step 7: Complete the Installation
1.
Connect the appropriate AC power cord to the switch.
Right Front Rack Column
Sleeves
Left Rear Rack Column
Installing the Fibre Loop Switch
Right Rear Rack Column
Switch
Switch Rail Flanges
27
Advertisement
Table of Contents
Troubleshooting
