Safety Instructions - HP P4459A Installation & Operation Manual

Safety Instructions

The following sections describe the symbols used on the fibre loop switch and
within this guide and also provides safety information about the product:
• Symbols Used on Equipment
• Symbols in Text
• Grounding Requirements
Symbols Used on Equipment
The following table describes the symbols that are used on the fibre loop switch.
HP P4459A 8-Port Fibre Loop Switch Installation & Operation Guide
Any surface of area of the equipment marked with these
symbols indicates the presence of electrical shock hazards.
Enclosed area contains no operator serviceable parts.
Warning: To reduce risk of injury from electrical shock
hazards, do no open this enclosure.
This product is a safety Class I product which has a
protective earthing terminal. There must be an
uninterrupted safety earth ground from the main power
source to the product's input wiring terminal, power
cord(s), or supplied power cord set(s). Whenever it is
likely that the protection has been impaired, disconnect the
power cord(s) until the ground has been restored.
APPARATEN SKALL ANSLUTAS TILL JORDAT
NÄTTUTAG.
iii