R-Tech C-MIG 315 Operation Instructions Manual page 3

3
Thank you for selecting the R-Tech C-MIG 315 Compact Mig Welder. We want you to take pride in
operating our C-MIG 315 as much pride as we have taken in making this product for you.
PLEASE EXAMINE CARTON AND EQUIPMENT FOR DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser upon receipt from the courier.
Consequently all claims for material damaged in shipment must be made by purchaser against the
transportation company used.
Please record your equipment identification below for future reference. This information can be found on
data plate at rear of machine.
Product C-MIG315
Serial No. ___________________________________
Date of Purchase _____________________________
Where Purchased _____________________________
Whenever you request replacement parts or information on this equipment please always supply
information you have recorded above
This product is covered by 2 years collect and return UK warranty, R-Tech will cover cost of collection,
repair and return of item to UK mainland (other areas are RTB). External items, torch, earth lead etc are
covered by 3 months warranty. Any faults/damage found caused by customer will be charged pro-rata.
Please read this operator manual completely before attempting to use this equipment.
Pay particular attention to the safety instructions we have provided you for your protection
The level of seriousness to be applied to each section is explained below
WARNING
This statement appears where the information must be followed exactly to avoid serious personal
injury.
CAUTION
This statement appears where the information must be following to avoid a minor personal injury or
damage to this equipment.