HP L10 User Manual page 64

2. From the Main menu, enter 3 (Management options) to display Management Options
menu:
Management options Menu:
1. Return to Main Menu
2. Set SNMP get community name
3. Set SNMP set community name
4. Set SNMP trap community name
5. Set SNMP trap server IP addresses
6. Set MIB-2 sysname
7. Restore default values to SNMP get, set, trap community names
8. Clear SNMP trap server IP address list
3. Enter 6 to set the MIB-2 sysname for the child hub (optional).
4. Type a unique name for the child hub, then press <
5. Enter 1 to return to the Management Options menu, then enter 1 again to return to the
Main menu.
6. From the Main menu, enter 2 (Set Networking parameters) to display the Network
Setup menu.
Network Setup Menu:
1. Return to Main Menu
2. Select IP address [current = nnn.nnn.nnn.nnn]
3. Select Subnetworking Mask [current = nnn.nnn.nnn.nnn]
4. Select Default Gateway address [current = nnn.nnn.nnn.nnn]
5. Save Network Setup changes and reboot
6. Proxy Master Setup
7. From the Network Setup menu, enter 6 to display the Proxy Master menu:
Proxy Master Menu: <Current state: Proxy Master ENABLED>
1. Return to previous Menu
2. Toggle current Proxy Master state and reboot
8. To disable the proxy master option (configure the hub as a child), enter 2. The hub is
rebooted automatically and the Main menu reappears.
To verify that the hub is configured as a child, return to the Proxy Master menu. The
proxy master state for a child hub is displayed as " DISABLED."
Enabling Hub Management
62
>.
E
NTER