2410 and 5410 User Guide
Using the Call Log
You can make calls directly from the call log. Whilst in the call log you can still make a call by going off-
hook. To dial a new call, press
the dial pad key functions.
Setting Which Calls are Logged
Caution
•
If you change the call log settings, any call details already in the call log that no longer match the
selection are deleted.
To set which calls are logged:
1. To exit any other mode, press
2. Press
Option.
3. Press
Log Setup. A menu showing Answered, Un-Answered and Outgoing, with their
current settings displays.
4. To toggle a particular setting between Yes and No, press
To underline a call type's current setting, press
underlined setting, press Yes/No.
5. Do one of the following:
•
To save the settings and return to the options menu, press
confirmation tone.
Note
•
If you press
not match the call types selected are deleted from the call log.
or
•
To return to the
or
•
To return to the call handling screen without saving any changes, press
Page 26
15-601076 Issue 05b (28th February 2008)
SPEAKER. Similarly, you can still receive calls and handle them using
EXIT and then press any
Save after changing the settings, any existing call log entries that do
Options menu without saving any changes, press
below the display.
next to it. Alternatively;
next to it. To change the value of the currently
Save. You will hear a
2410 and 5410 User Guide
Cancel.
EXIT.
IP Office