Transferring To An Idle Station - Toshiba DP5000-Series User Manual

Transferring to an Idle Station

You can transfer internal or outside calls to an idle station from either a DSS console
or a ADM.
To transfer a call to an idle station
1. Press the DSS button corresponding to the station to be called.
The call is placed automatically on hold. The Line or extension LED flashes green
at double the on-hold rate, and the DSS LED flashes green. You hear a single ring
tone. (If using the Tone signalling mode, you hear successive ring tones.)
2. Announce the call.
With Tone signalling, you would have to wait for the called station to answer
before announcing the call.
3. Hang up.
The call rings the called station when you hang up. While the called station is
ringing, the DSS LED is steady red, and the Line LED flashes green at the on-hold
rate or if on a extension button, it goes idle.
When the called station answers the call, the DSS LED stays steady red, and the
Line LED becomes steady red.
4. If the station does not answer before a period set in system programming, the call
recalls your station.
Strata CIX DP5000-series Telephone User Guide 05/09
ADM/DSS Console
DSS Console
77