Toshiba DP5000-Series User Manual page 118

Administrator Programming
System Features
To cancel the DISA security code
CAUTION!
1. Press DN + DISA Security Access Code (see note). A confirmation tone is heard
2. Dial the existing DISA security code (1-15 digits)
3. Press
4. Press
5. A confirmation tone is heard and display shows Data Programmed.
6. Lift handset off-hook and on-hook to end session.
The DISA Security Access Code needs to be defined in the Strata CIX by the
Note
System Administrator through eManager as it is not set in the default database.
102
Canceling the DISA security is very dangerous and allows your telephone
system to be open to hackers and could result in unauthorised long
distance telephone calls. Perform the following steps with caution.
#
, confirmation tone is heard.
#
again, this will allow the DISA feature to be used without a security code.
Strata CIX DP5000-series Telephone User Guide 05/09