Network Provision; Bell; Static Ip - Campbell IPn3Gb Instruction Manual

5.3.4 Network Provision

NOTE

5.3.4.1 Bell

5.3.4.1.1 Static IP

The network provision configurations are specific to the Service Provider. The
remaining configuration steps are the same for Bell, Telus, or Rogers users.
Details related to Dynamic and Static IP configurations are listed below.
To provision the modem on the service provider network the following
information will need to be entered into the "Config" tab under "Carrier".
Details provided below for specific service providers address the use of public
dynamic IP services.
It is possible to use a Public Static IP with the modem. For static IP accounts,
enter the static IP in "Static IP address". Please contact your service provider
for details related to the required APN for static IP accounts.
Access Point Name (APN): For example, static.bell.ca
Static APNs differ across Canada; ask Bell Service Provider for
appropriate APN
User Name: 10-digit phone#@static.bell.ca
Password: required; ask Bell Service Provider
Submit. (Save)
7