Table of Contents
Advertisement
T E C H N O L O G I E S
User Guide
NAS 3.0 Adapter
(NAS30U2)
www.addonics.com
v5.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Advertisement
Table of Contents
Related Manuals for Addonics Technologies NAS30U2
Summary of Contents for Addonics Technologies NAS30U2
-
Page 1: User Guide
NAS 3.0 Adapter (NAS30U2) www.addonics.com v5.1.11 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/... -
Page 2: Table Of Contents
Table of Contents About the NAS 3.0......................1 NAS 3.0 Hardware Installation..................2 Open NAS30U2 Web GUI by Using Web Browser............3 Status..........................3 Administration........................4 Date/Time........................4 LAN Configuration......................5 PPPoE Setting....................5 DDNS Setting.....................6 Maintenance.......................7 To Reset the NAS Adapter.................8 How to Create a User..................9 To Access the PUBLIC Folder of the File Server..........10 How to Modify SAMBA Account Password..............11... -
Page 3: About The Nas 3.0
Network Environment There are 3 different setup conditions you can choose: Setup NAS30U2 as a DHCP Client: If the NAS30U2 is connected to a LAN network with an active DHCP server, it will obtain an IP address from DHCP server automatically. -
Page 4: Nas 3.0 Hardware Installation
Connect 5V power adapter to power up the NAS adapter NAS30U2 connected directly to a computer’s NIC card If you connect the NAS30U2 to a computer directly, it will act as a DHCP server, assigning itself an IP address automatically and will also assign an IP address to the computer’s network card. -
Page 5: Open Nas30U2 Web Gui By Using Web Browser
When NAS30U2 has been found, click “Connect” to enter web GUI utility. Open NAS30U2 web GUI by using web browser. Open web browser and type default host name “storage” in the search bar. Default login is “admin” for both User name and password. Click “OK”... -
Page 6: Administration
By default SNTP is set to Network Time Service otherwise select synchronize to PC. If internet access is available, we recommended setting SNTP to Network Time Service instead. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 7: Lan Configuration
LAN Configuration By default, “LAN Config” is set to “Automatic IP”. This will allow the NAS30U2 to obtain its IP address automatically. If you prefer setting it manually, select the static IP option, enter your own value and click “Apply” to confirm the new setting. -
Page 8: Ddns Setting
DNS server, to which the computer sends a request for the translation of the address. After receiving the response with the numeric address, the computer connects to the relevant computer/server. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 9: Maintenance
Maintenance This page allows you to update the NAS30U2 firmware, to go back to factory default settings or reboot NAS system. Firmware update: Follow the steps below to update the loader and firmware for NAS30U2. -
Page 10: To Reset The Nas Adapter
Guest users. A default Guest user is also created. Note: Only use English alphabet for folder names and no special characters when creating new folders. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 11: How To Create A User
NAS will also create a SAMBA folder named “User1”. Click “Modify” to share a folder. Select “User1” from Folder List and click the “right arrow” to add user on “Sharing List”. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 12: To Access The Public Folder Of The File Server
Now you have set up the folder that you wish to share on your NAS . This folder can be access from other computer on your local network. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 13: How To Modify Samba Account Password
How to delete a File Server account Select an account you wish to delete. Click “Delete” to proceed. Please note that all the data inside the folder will be lost after the delete. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 14: Webdav Server Setup
Click on the “Add” button and type new account name and password. Click “OK”. The NAS will also create a SAMBA folder named “User1”. Click “Add” button. The NAS will create a username “Test” and folder named “Test”. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 15: How To Modify Webdav Account Password
Select “Test” and then click “Modify”. Enter new password then click “Apply” to save setting. Select “Test” from Folder List and click the “right arrow” to add folder on “Sharing List”. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... -
Page 16: Webdav Client Setup
4. Enter the URL of your NAS with the share folder name. In our example type “http://NAS_IP:80/webdav/test” and click “Next” and go to the next step. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... - Page 17 5. Enter the user's name and its password which has the WebDAV privilege to access this shared folder. 6. Name the network place. 7. The network place has been created and ready to use. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
-
Page 18: Xbox 360 Media Server
XBOX 360 Media Server The Media server can be used to share your photo and music files stored on the NAS30U2 with an X-BOX360 video game console from Microsoft. Before you start, make sure both devices are connected to the same local network and turned on. - Page 19 Press X button of the Xbox console to change the source and select your network drive. It should show up as storagexxx and display the folder that you have set up earlier on your NAS30U2. Inside the share folder, you can access your picture or music files, depending on which mode you are currently using.
-
Page 20: Print Server
Print Server Install printer driver, (for example. if Epson PL-6200L Printer is connected to the NAS30U2, you must install PL-6200L driver into the computer first.) After driver installation, click “Start” → “Setting” → “Printer and Faxes” → “Add a printer”→ “Next”. - Page 21 Connect USB printer to NAS30U2. Your network environment should be similar with diagram below: Select “Local printer” and click “Next” to continue. Select “Create a new port type of port:” then choose “Standard TCP/IP Port” then click “Next” to continue.
- Page 22 Enter the NAS30U2 IP address then click “Next” to continue. Select “Custom” and go to “Setting”. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
- Page 23 Byte Counting Enabled then click “OK” to finish the port setting. Click “Finish” to complete TCP/IP printer setup. Note: The NAS30U2 printer server does not support GDI/Host-based printers. For some Multi Function Printers (MFP); scanning functions might not be functional probably.
-
Page 24: P2P Server
Click “Browse” and select torrent file then click “Upload” The file will show up to the download queue. Note: Jobs listed in the Download Queue will be removed when NAS30U2 is turned off or USB storage is removed. Mail Notification After a download is successful, an email will be sent to the designated email address. -
Page 25: Mac Installations (Mac 10.5.4 Or Above)
Mac installations (Mac 10.5.4 or above) Open the Mac browser “Safari” and key-in the host name of the NAS30U2 (for example, “Storage-0000”). It will detect the NAS30U2 automatically. How to setup SAMBA in Mac OS X 10.5.4 Click “Go” on the toolbar, and select ”Network” as the screenshot shown below. - Page 26 Click on the Storage-xxxx (or the correct name of the NAS30U2). Select the folder you wish to share, and click “OK” to share the folder. Click “OK” to show the folder in the Desktop. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...
-
Page 27: How To Map Your Nas30U2 To Your System
How to Map your NAS30U2 to your system. Showing NAS Disk Drive in network Press “Start” button on Windows desktop Press “Search” Select Folders Select Computer or people Select a computer on the network and a new window will appear. - Page 28 This creates a direct access to the shared drive from My Computer (for more information about drive mapping, refer to your Windows manual). Access SMB folder of NAS30U2 in Ubuntu 8.04 First, using the console get the prerequisites for the samba file system:...
-
Page 29: Frequently Asked Questions
Maximum User Login Samba 8 User (Total 64 TCP connection at the same time) Q: Any limitations for NAS 3.0 file name length? A: The limitation of length of file folder is 12 bytes. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/... - Page 30 Q: Why can't I create new WebDAV link in my windows computer? It always connect to the link which I deleted previously. Please go to recycle bin in your computer and clean the WebDAV link which you have deleted previously. www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/...