Ddns Setting - Addonics Technologies NAS30U2 User Manual

Status: Display PPPoE connection status.
Service Name: It's an optional field. Place any name you want that
will help you remember the configuration.
Account Name: Enter your user name provided by your ISP.
Password: Enter your password provided by your ISP.
Service on Demand: The router will ONLY connect itself to your ISP when
there's internet request demanded by any LAN user and disconnect itself
when the transaction is done.
Idle Time (Seconds): Idle time means the storage will disconnect itself from
the ISP after being idle for a specific time. If the time is set to 0, the storage
will not disconnect itself.
Max Connection Time (Hours): A specific time that indicate how long the
storage can stay connection with ISP.
IP Address Negotiation: IP Address and Subnet Mask should be assigned
within the same network as the PPPoE-enabled DSL modem.
Fixed IP Address: Use to assign an IP address manually.
AC Name: It's an optional field. Use to configure an access concentrator
(AC) name on the PPPoE interface.
WAN IP: It shows what the storage's current IP address is.

DDNS Setting

DNS service (Domain Name System) is used for the conversion of IP
addresses from domain names to the numeric format. This means that there
is no need to keep in mind the address 62.122.129.15, but it is sufficient to
remember www.xxxx.com. Translation of the domain name into the set of
numbers is performed by the appropriate DNS server, to which the computer
sends a request for the translation of the address. After receiving the
response with the numeric address, the computer connects to the relevant
computer/server.
6
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/