Maintenance - Addonics Technologies NAS30U2 User Manual

If you do not have register a domain name, you may apply for a free Domain
name from the free DNS site http://www.dyndns.com or
http://www.2mydns.com and input the host name and password and click
apply to complete the setup.

Maintenance

This page allows you to update the NAS30U2 firmware, to go back to factory
default settings or reboot NAS system.
Firmware update: Follow the steps below to update the loader and firmware
for NAS30U2.
1. Download the latest firmware.
2. Store the firmware file on your computer and decompress them if
necessary.
3. Browse your system and locate the firmware (BIN file).
4. Click on "Update".
5. Confirm the pop-up massage to start the update.
6. Wait and DO NOT click anywhere else or turn off the power. The
upgrade might take a few minutes.
7. Once the update is done, it will prompt you to reboot the device.
8. Click on "Reboot" to restart the device.
9. Wait for about one minute and then go to the status page to
confirm the update was successful.
Note: Resetting the device will NOT remove SAMBA/WebDAV account
settings! Please do not power off or disconnect NAS30U2 connection during
the firmware update process.
7
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/