Addonics Technologies AD2SAHDCF User Manual

Addonics technologies dual cf-sata hdd adapter user's guide

Download this manual

Enlarged version

Addonics

T E C H N O L O G I E S

Dual CF-SATA HDD Adapter

Model: AD2SAHDCF

User's Guide

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions, it may cause harmful interfer ence to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and off, the user

is encouraged to try and correct the interference by one or more of the following

suggestions.

Reorient or relocate the receiving antenna

Increase the distance between the equipment and the receiver

Connect the equipment to a different power outlet other than the one where receiver is

connected

Consult a certified television or radio technician

Version 1.0

Overview

2.5" form

factor bracket

SATA Power

Connector

SATA Data

Connector

USB Port

Note: The default setting for the RAID setting is

BIG. The switch has 3 settings. You slide the switch

from left to right to change RAID setting.

CF Slot 1

CF Slot 2

Switch

Page 1 Addonics T E C H N O L O G I E S Dual CF-SATA HDD Adapter Model: AD2SAHDCF User’s Guide Version 1.0 FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules.
Page 2 AD2SAHDCF as a boot device Recommendations on using the The CF cards plug into the AD2SAHDCF can be configured as your boot drive. It is recommended that the CF cards be configured as a raid set first by connecting it as an external device.
Page 3 Steps to configure a SAFE RAID set using USB connection (Windows XP) Open the 57xx SteelVine Manager. Insert the 2 CF cards to the CF slots on the AD2SAHDCF. Connect the USB cable to the AD2SAHDCF. The 57xx SteelVine Manager detects the 2 CF cards in the AD2SAHDCF.
Page 4 SYSTEM INFORMATION – Type of computer, peripherals, etc. OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information FREE Software Drivers for all Addonics Technologies Products are available 24 hours per day at the World Wide Web Site: www.addonics.com.