Frequently Asked Questions - Addonics Technologies NAS30U2 User Manual

Frequently Asked Questions:

Q: What is NAS 3.0 default IP?
A: The default IP address for NAS 3.0 is 169.254.0.1 or enter "storage" in IE browser
bar to search for it.
Q: What is NAS 3.0 default login name and password?
A: The NAS 3.0 default Login name: "admin", default password: "admin".
Q: Forgot my login password, what should I do?
A: Please follow the steps below.
Press the reset button and keep that position.
Unplug and reconnect the power.
Wait for 30 seconds, and then release the reset button.
NAS will go back to factory defaults.
PS: Only SAMBA/WebDAV account settings will remain in the NAS 3.0 Hard disk
others settings will go back to factory default.
Q: Why can't I create Accounts in SAMBA or WebDAV ?
A: A USB storage device must be connected to the NAS 3.0 to create Samba or
WebDAV accounts.
Q: Why can't I upload the files via LAN connection or got disconnected?
A: Please make sure you are connected to the network properly and you have the
access right (read & write) for the folders.
Q: How to setup NAS 3.0 to be in Daylight saving time?
A: NAS 3.0 does not support Daylight saving time setting.
Q: Why WinXP can not enter SMB folder with password via NAS 3.0?
A: Please update Win XP to SP2 or above. After the update, please make sure if you
have installed Norton Internet Security, if you do, please check with Norton service
center.
Q: What Operating Systems does NAS 3.0 support?
A: NAS 3.0 supports Microsoft Windows 2000/XP/Vista and Apple Macintosh OS
10.5.4 above.
Q: What is the limitation of user to login Samba server?
A: Samba Server User Level Access (maximum create 16 user accounts, 16 folders
shared by one account)
Maximum User Login Samba 8 User (Total 64 TCP connection at the same time)
Q: Any limitations for NAS 3.0 file name length?
A: The limitation of length of file folder is 12 bytes.
27
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/