To Reset The Nas Adapter - Addonics Technologies NAS30U2 User Manual

To reset the NAS adapter.

1. While the NAS adapter is powered on, press the reset button with a
paper clip and keep that position.
2. Disconnect the power cable and reconnect the power after 5 seconds.
3. After 30 seconds release the reset button.
System reboot: This can be used to restart the network drive after a
firmware update.
Factory defaults: If you experience problems after a firmware update, it is
recommended to reset all settings.
File Server (Samba server) setup
Samba server allows you to share data or files through the network LAN.
When a USB storage device is connected, a default Public folder is available
to be shared among Guest users. A default Guest user is also created.
Note: Only use English alphabet for folder names and no special characters
when creating new folders.
8
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/