Change base PIN code
Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings.
The default PIN is 0000.
1. Press
, scroll
to P IN CODE and press
2. Scroll
3. Enter the current 4 digit PIN code (default: 0000) and
press
.
4. Enter your new 4-digit PIN and press
5. Re-enter the new PIN again and press
Dial mode
Your BT Studio 1500 is set to Tone dialling. In the UK,
you should only need to change this if connected to an
older type of switchboard/PBX which requires Pulse
dialling.
1. Press
, scroll
2. Scroll
to DIAL MODE and press
3. Press
or
to select TONE DIAL or PULSE and
Vol
press
.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Studio 1500 – Issue 3 – Edition 01 – 18.10.06 – 7875
to SETUP and press
.
.
to SETUP and press
.
IMPORTANT
If you change the base PIN, make
sure you keep a record of the new
number on page 55.
.
to confirm.
.
Base settings
45