Change Base Pin Code; Dial Mode - BT Studio 3100 User Manual

8474 Studio 3100 UG Iss2 [2]

Change base PIN code

Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings.
The default PIN is 0000.
1. Press , scroll
2. Scroll to P IN CODE and press
3. Enter the current 4 digit PIN code (default: 0000) and
press .
4. Enter your new 4-digit PIN and press
5. Re-enter the new PIN again and press

Dial mode

Your BT Studio 3100 is set to Tone dialling. In the UK, you
should only need to change this if connected to an older type
of switchboard/PBX which requires Pulse dialling.
1. Press , scroll
2. Scroll to DIAL MODE and press
3. Press or
press .
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
25/10/07
BT Studio 3100 – Issue 2 – Edition 2 – 25.10.07 – 8474
to SETUP and press
.
.
to SETUP and press
.
to select TONE DIAL or PULSE DIAL and
16:38 Page 31
IMPORTANT
If you change the base PIN, make sure
you keep a record of the new number
on page 41.
.
to confirm.
.
Base settings 31