Register A Different Make Of Handset; To Your Base; Selecting A Base - BT Studio 1500 User Manual

48 Additional handsets and bases
Naming additional handsets
Once you have registered
additional handsets you may wish
to give them a different name,
see page 40.
IMPORTANT
DECT GAP Profile only guarantees
that basic calling-functions will
work correctly between different
makes/types of handset and base.
There's a possibility that certain
services such as Caller Display will
not work correctly.
Handsets can be registered with up
to 4 bases.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Studio 1500 – Issue 3 – Edition 01 – 18.10.06 – 7875
If the base is not found after a few seconds, the handset
returns to standby. Try registering again.
When a handset is registered to a base, it is automatically
assigned a number which is displayed on the handset and
must be used for internal calls.
If registration does not work:
• Try again selecting a different base number.
• Make sure there is no other electrical equipment very
close by that may interfere with the registration signal.
Register a different make of handset to your
BT Studio 1500 base.
1. At the base: Press and hold
you hear two beeps. You now have 90 seconds to register
the handset.
2. At the handset: Follow the registration instructions given
in your handset's user guide.

Selecting a base

When your handset is registered to more than one base,
for example, one at work and one at home, you can
select the base you want it connected to.
Page for 3 seconds until