Record Your Own Ogm - BT Studio 1500 User Manual

Record your own OGM

This will replace the pre-recorded or your own previous
outgoing message. However, you can re-instate the
pre-recorded OGM at any time by deleting your own
recorded OGM.
Using the base:
1. Press and hold
of OGM you want to record.
2. Press and keep holding
or to select Answer Only. The machine announces
"Please speak after the tone to end recording release the
button", then a beep is heard.
3. Whilst still holding
slowly and clearly, close to the base.
4. To end recording, release the
Using the handset:
1. Press , scroll
to OGM SETTING and press
2. Scroll
to RECORD OGM and press
3. Scroll
to select either ANS AND REC or ANS ONLY
4. Press or
Vol
and press .
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Studio 1500 – Issue 3 – Edition 01 – 18.10.06 – 7875
until prompted to select which type
to select Answer & Record
or , speak your message
or
to TAM SETTINGS and press
.
.
Using the answering machine
Answer Only
With Answer Only selected, your
caller will hear an announcement
only and will not be able to leave
a message. The pre-set Answer
Only outgoing message is "Hello,
your call cannot be taken at the
moment and you cannot leave a
message, so please call later".
If recording your own Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
To reinstate either pre-recorded
message, delete your own message.
button.
.
31