Record Your Own Ogm - BT Studio 3500 User Manual

Record your own OGM

This will replace the pre-recorded or your own previous
outgoing message. However, you can re-instate the
pre-recorded OGM at any time by deleting your own
recorded OGM.
Using the base:
1. Press and hold
OGM you want to record.
2. Press and keep holding
or to select Answer Only. The machine announces
"Please speak after the tone to end recording release the
button", then a beep is heard.
3. Whilst still holding
and clearly, close to the base.
4. To end recording, release the
Using the handset:
1. Press , scroll
2. Scroll to OGM SETTING and press
3. Scroll to RECORD OGM and press
4. Press or to select either ANS AND REC or ANS ONLY and
press .
If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com
until prompted to select which type of
to select Answer & Record
or , speak your message slowly
or
to TAM SETTINGS and press
.
.
button.
.
Using the answering machine
Answer Only
With Answer Only selected, your
caller will hear an announcement only
and will not be able to leave
a message. The pre-set Answer Only
outgoing message is "Hello, your call
cannot be taken at the moment and
you cannot leave a message, so
please call later".
If recording your own Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
To reinstate either pre-recorded
message, delete your own message.
31