Moving The Appliance; Preparation Of The Working Area - Miele HM 16-83 Operating Instructions Manual

Moving the appliance

The rotary ironer is fitted with four roll-
ers.
^ Hold the ironer by the ironing table
and push or pull to move it.
To overcome obstacles such as carpet
edges and doorways but also to steer:
^ Tilt the appliance slightly.
Moving the appliance
Preparation of the working
area
A height-adjustable chair is useful and
also a flat surface, e.g. a table, to lay
the ironed laundry on.
Make sure the ironer is level and secure
and that it cannot roll sideways.
Place close at hand:
– a basket with the laundry ready for
ironing to the left of the rotary ironer,
– a surface for the ironed laundry to
the right of the rotary ironer.
Shirts, overalls and blouses etc., should
be hung on coathangers immediately
after ironing.
Small items can be hung over the swing
out bar.
Have some water ready for redamping
the laundry if necessary.
7