Hunter Ceiling Fans Installation And Operation Manual
Hide thumbs
Also See for Ceiling Fans:
- Installation manual (44 pages) ,
- Installation and operation manual (31 pages) ,
- Installation instructions manual (6 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter Ceiling Fans
Summary of Contents for Hunter Ceiling Fans
- Page 1 1 1 1 1 1 © 2003 Hunter Fan Company 41854-01 11/12/2003...
-
Page 2: Getting Ready
Lift 40 pounds. We are proud of our work. We appreciate the opportunity to sup- If you need help installing the fan, your Hunter fan dealer can ply you with the best ceiling fan available anywhere in the world. direct you to a licensed installer or electrician. -
Page 3: Preparing The Fan Site
Obstruction If your existing fan site is suitable, go to the installing the ceiling 7' Minimum plate section and begin installing your new Hunter fan. to Floor preparing a new fan site To prepare the fan site follow four steps: •... -
Page 4: Preparing The Wiring
Refer to Figure 8. Support Brace Isolators Washer Outlet Box 1/16" Recess Wood Screw Ceiling Plate Figure 8 - Inserting the isolators into the ceiling plate Figure 6 - Installing the outlet box 41854-01 11/12/2003 © 2003 Hunter Fan Company... -
Page 5: Hanging The Fan
Note: Be sure to change the factory default switch settings to your own unique code. © 2003 Hunter Fan Company 41854-01 11/12/2003... -
Page 6: Installing The Canopy
Refer to Figure 15. Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). Your fan may include blade grommets. If your fan has grom- mets, insert them by hand into the holes on the blades as shown in Figure 18. - Page 7 Blade Mounting Screws Blade Iron Medallion Figure 20 - Attaching the blade to the blade iron and medallion Figure 23 - Attaching the blade assembly to the hub of the fan assembly © 2003 Hunter Fan Company 41854-01 11/12/2003...
-
Page 8: Attaching The Light Fixture
Install three #6-32 housing assembly screws into the motor Your Hunter Fan comes with two decorative clamps: upper clamp housing as shown in Figure 26. Do not completely tighten the and lower clamp. Each clamp assembly is made up of two pieces. -
Page 9: Setting Up The Remote
Turn on electrical power to the fan. onto the threaded rod until tight. Ceiling fans work best by blowing air downward (counterclock- Slide the support arms together until they are tight to the glass. wise blade rotation) in warm weather to cool the room with a Tighten the three screws on the support arms. - Page 10 See figure 31. If desired, the holder can be mounted to at convenient location on a wall. Figure 31 - Remote holder assembly 41854-01 11/12/2003 © 2003 Hunter Fan Company...
-
Page 11: Troubleshooting
Select a fan speed button to start fan, then press the re- verse button. If you need parts or service assistance, please call 888-830-1326 or visit us at our WEB site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 © 2003 Hunter Fan Company 41854-01 11/12/2003...
Need help?
Do you have a question about the Ceiling Fans and is the answer not in the manual?
Questions and answers