[Initial Startup]; [Startup Input Select]; [Digital Link Input] - Panasonic PT-RZ470EK Operating Instructions Manual

12) Press the <ENTER> button.
f The command is fixed and n is displayed at the left of the selected command.
f After the command is fixed, press the <RETURN> button or the <MENU> button to close the detailed setting menu.
13) Press as to select [STORE], and press the <ENTER> button.
Note
f When deleting commands that have already been set, press the <DEFAULT> button on the screen displayed in step 5).
f If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f The operating time will be the local time. (x page 89)
f If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with this function may not be executed.

[INITIAL STARTUP]

Set the startup method when the <MAIN POWER> switch is set to <ON>.
1) Press as to select [INITIAL STARTUP].
2) Press qw to switch [INITIAL STARTUP].
f The items will switch each time you press the button.
[LAST MEMORY]
[STANDBY]
[ON]

[STARTUP INPUT SELECT]

Set the input when the projector is switched on to start projection.
1) Press as to select [STARTUP INPUT SELECT].
2) Press qw to switch [STARTUP INPUT SELECT].
f The items will switch each time you press the button.
[LAST USED]
[COMPUTER]
[VIDEO]
[DVI-I]
[HDMI]
[DIGITAL LINK]

[DIGITAL LINK INPUT]

Can only be selected when [STARTUP INPUT SELECT] is set to [DIGITAL LINK].
1) Press as to select [DIGITAL LINK INPUT].
2) Press qw to switch [DIGITAL LINK INPUT].
f The items will switch each time you press the button.
[CURRENT]
[INPUT1]
[INPUT2]
[INPUT3]
[INPUT4]
[INPUT5]
[INPUT6]
[INPUT7]
[INPUT8]
[INPUT9]
[INPUT10]
Chapter 4 Settings — [PROJECTOR SETUP] menu
Starts the projector in the condition before the <MAIN POWER> switch is set to <OFF>.
Starts in standby.
Starts projecting immediately.
Keeps the input selected last.
Sets the input to COMPUTER.
Sets the input to VIDEO.
Sets the input to DVI-I.
Sets the input to HDMI.
Sets the input to DIGITAL LINK.
Switches the input to DIGITAL LINK.
Switches to DIGITAL LINK input, and that input switches to the specified input when the Panasonic
twisted-pair-cable transmitter is connected.
ENGLISH - 85