[Status]; [Date And Time] - Panasonic PT-RZ470EK Operating Instructions Manual

4) Press qw to switch [HDMI].
f The items will switch each time you press the button.
[HDMI AUDIO]
[AUDIO IN]
Note
f If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.
Setting audio input when DIGITAL LINK input is selected
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [DIGITAL LINK].
4) Press qw to switch [DIGITAL LINK].
f The items will switch each time you press the button.
[DIGITAL LINK AUDIO]
[AUDIO IN]
Note
f If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.

[STATUS]

Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The [STATUS] screen is displayed.
3) Press qw to switch the pages.
f The page will change each time you press the button.
[INPUT]
[SIGNAL NAME]
[SIGNAL FREQUENCY]
[PROJECTOR RUNTIME]
[INTAKE AIR TEMP.]
[OPTICS MODULE TEMP.]
[NUMBER OF ENTRY
SIGNAL]
[EMULATE]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[MAIN VERSION]
[SUB VERSION]
[NETWORK VERSION]
Note
f The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.
Setting the time zone
1) Press as to select [DATE AND TIME].
Chapter 4 Settings — [PROJECTOR SETUP] menu
Outputs HDMI audio.
Outputs audio connected via the <AUDIO IN> terminal.
Outputs DIGITAL LINK audio.
Outputs audio connected via the <AUDIO IN> terminal.
Displays the input terminal currently selected.
Displays the input signal name.
Displays the frequency of the input signal.
Displays the operation times of the projector.
Displays the status of the air intake temperature of the projector.
Displays the status of the internal temperature of the projector.
Displays the number of registered signals.
Displays the [EMULATE] settings.
Displays the type of the projector.
Displays the serial number of the projector.
Displays the main version of the firmware of the projector.
Displays the sub version of the firmware of the projector.
Displays the network version of the projector.
ENGLISH - 89