[Network] Menu; [Digital Link Mode]; [Digital Link Setup] - Panasonic PT-RZ470EK Operating Instructions Manual

[NETWORK] menu

On the menu screen, select [NETWORK] from the main menu, and select the item from the
sub-menu.
Refer to "Navigating through the menu" (x page 44) for the operation of the menu screen.
f After selecting the item, press asqw to set.

[DIGITAL LINK MODE]

Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch [DIGITAL LINK MODE].
f The items will switch each time you press the button.
[AUTO]
[DIGITAL LINK]
[ETHERNET]
Possible communication modes
Setting
[AUTO]
[DIGITAL LINK]
[ETHERNET]
l: Communication possible
―: Communication not possible

[DIGITAL LINK SETUP]

Set the communication method of DIGITAL LINK.
When the projector is connected directly via Ethernet
1) Press as to select [DIGITAL LINK SETUP].
2) Press the <ENTER> button.
f The [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(ETHERNET)].
4) Press qw to switch the communication method.
f The items will switch each time you press the button.
[AUTONEGOTIATION]
[100BaseTX-Full]
[100BaseTX-Half]
5) Press as to select [STORE].
6) Press the <ENTER> button.
7) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
98 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Switches the communication method automatically to DIGITAL LINK or Ethernet.
Fixes the communication method to DIGITAL LINK.
Fixes the communication method to Ethernet.
For DIGITAL LINK
For Ethernet
The communication method is set automatically.
Full-duplex communication method is set.
Half-duplex communication method is set.
Communication possible
HDMI Ethernet
l l
―
l
l l
―
l
RS-232C
l
―
l
―