Microtech ZiO! User Manual page 38

USER'S
USER'S
MANUAL
MANUAL
Removing a card (PC)
1.
Make sure that the "Access/Power" indicator is not flashing. The access indicator will
flash when data is being read or written on the card. Wait until the operations are
complete and the access indicator is no longer flashing before attempting to remove the
card. Removing a card during access operations will cause the data to be lost or
corrupted.
2.
To remove a card, grasp the end of the card with your thumb and index fingers, and
remove the card from the slot.
38
?
CONTENTS HELP CONTACT BACK
™
NEXT