Microtech ZiO! User Manual page 12

USER'S
USER'S
MANUAL
MANUAL
5.
A final dialog box will appear advising that the software was successfully installed.
Click "Restart."
Congratulations! Driver installation is now complete. You may now connect the Microtech
ZiO! to your computer after restarting. Proceed to the next page for instructions on
connecting the Microtech ZiO!.
INSTALLATION NOTE: If you attempt to attach the ZiO! USB connector to the USB port of your
Macintosh or hub prior to installing the Microtech ZiO! drivers you may receive the following (or
a similar) message:
If this occurs, click "Cancel", install the driver software from the CD-ROM, and then connect the
ZiO!. For more information on attaching USB devices proceed to the section "Connecting to the
USB Port" (page 13) or "Connecting to a USB Hub" (page 15).
12
?
HELP
CONTENTS
BACK
CONTACT
™
NEXT