Connecting To The Usb Port - Microtech ZiO! User Manual

USER'S
USER'S
MANUAL
MANUAL

Connecting to the USB port

1.
Connect the USB connector of the Microtech ZiO! to the USB port of your
Macintosh computer. Use only the primary ports located on the back (G3, G4) or
side (iMac, iBook) - do not use the USB port on the keyboard. If necessary, connect
the ZiO! first to the included USB extender cable, then connect the other end of the
extender cable to your USB port.
2.
Make sure the cable ends are firmly connected. Be careful not to confuse the upper
and lower parts of the connector. Do not force connections, as this may damage the
computer or the Microtech ZiO!.
NOTE:The ZiO! may be connected to the computer while the computer is running.
In the illustration below, the ZiO! connects directly to the USB port on your Macintosh.
The ZiO! can also be connected using the included extender cable (see next page) so it
can be positioned in more convenient locations.
13
?
HELP
CONTENTS
Connect the USB plug of the ZiO!
directly to the USB port on
your Macintosh.
BACK
CONTACT
™
NEXT