System Mode Basic Operation - Denso BHT-904BB User Manual

4.4.2 System Mode Basic Operation

Menu Selection and Display
Use the following procedure to select and display each menu.
1.
Press the
corresponding to the menu to
be selected.
Alternatively, press the cursor
keys ([▲] [▼]) to select the
menu.
The selected menu item will be
highlighted.
"SETUP" will be highlighted when
the System Mode is started.
2.
Press the ENT key.
The selected item is set and the
next screen displays.
Press the Backspace/clear key to return to the previous screen.
The selected item will be highlighted when returning to the previous screen.
3.
Repeat the above operation to display the target menu.
numeric key
Operation example
Select [4: SET SYSTEM] with
the [4] or [▲]/[▼] keys.
Select [2: DISPLAY] with the
[2] or [▲]/[▼] keys.
Barcode Handy Terminal
ENT key
BS/C key
45