System Menu ･････････････････････････････････････････････････50; Executing Setup ("Setup" Menu) - Denso BHT-904BB User Manual

BHT-904BB
4.5 SYSTEM MENU

4.5.1 Executing Setup ("SETUP" menu)

The BHT setup can be effectively executed using the BHT Setting and clone functions.
This section explains the setup with the clone function using the two BHTs. Use the following procedure to
setup the BHT.
1.
Select "0: SETUP" at the SYSTEM MENU and then press the
ENT key.
The screen on the right appears.
"1: CLONE":
Creates a BHT clone (duplicate) using the two BHTs.
The clone function is similar to the conventional HT-HT Copy
function. Differences between them are explained below.
OS Copy
Overwrite copy
(The file in the receiving device is overwritten
by the file in the transmitting device.)
File Copy
Clone
(Files in both receiving and transmitting
devices are identical.) [Default]
General system setting values
(excluding the items below)
• IP characteristic value (only when "0.0.0.0")
OS Setting Values
• Subnet mask
Copy
• Default gateway
• BHT-Ir protocol communication ID
• Clone authentication key
Progress Display
Display
History (usage history)
Target clone selection (OS)
Post-function execution operations
(reboot designation, etc.)
Setting Values
Copy mode (overwrite/clone)
Clone authentication key (*1)
Operational
Communication settings
Environment
(*1): The setting of the clone authentication key allows the clone function to be passworded.
Press the Backspace/clear key to return to the SYSTEM MENU.
50
Function Clone
Available Not Available
Available
Available Not Available
Available
Available Not Available
Displayed for Each File Forwarding
Item Progression Only
Available Not Available
Available Not Available
Designations No Designations
Available
Available Not Available
Available Not Available
Fixed
(IrDA: 460800)
HT-HT Copy
Available
Available
Available
Optional