Unfolding Instructions - BLADEZ PB-SM1816 Product Handbook

Place handle bar onto the Billet cap with the hole facing
down towards the threaded bolt as shown with arrow in
(FIG. 2)
Place the Billet Stem on top of the handle bar and the
cap and tighten the bolts to secure the handle bar onto
the cap as shown in (Fig. 3)
Unfolding Instruction
1. To unfold the XTR-Street II, begin by pressing
down on the FOLDING HANDLE with one hand
(Fig. 4), while gently pulling up on the handlebar
with the other hand.
2. Fully extend the handlebars to their upright
position until you feel the mechanism lock into
place (Fig. 5).
Page 7