Table of Contents
Advertisement
•
Insert the CF carrier back and reassemble with the 2 screws to the
CF door located on the rear face plate of ARK-3383.
Note: The Compact Flash socket is allocated as Secondary IDE Master.
3.9 Installing the 2.5" Hard Disk Drive (HDD)
You can attach one Serial ATA (SATA) hard disk drive to the ARK-3383's
internal controller. The following are instructions for installation:
•
Remove the power cord.
•
Unscrew the four screws from bottom cover of the ARK-3383.
•
Remove the bottom cover of the ARK-3383.
•
Assemble the hard disk to the bottom cover.
•
Connect the SATA cable to the connector and the hard disk.
•
Screw back the bottom cover with the four screws.
3.10 Connecting Power
Connect the ARK-3383 to a 12~24 VDC power source. The power source
can either be from a power adapter or an in-house power source.
27
Chapter 3
Advertisement
Table of Contents
