Becker Highspeed II Operating Instructions Manual page 39

Note:
If necessary, you can switch off the
smart speller in the navigation settings.
It should also be noted that in southern
countries (e.g. Italy), the "prefix" (e.g.
via Gran Mundo) needs to be entered
afterwards (e.g. Gran Mundo_via).
The OK key
The OK key can be used to transfer the
destination selected into the route calcu-
lation menu. If the destination required
appears in the upper edge of the display
once the first letters or numbers
have been entered, you can transfer the
destination immediately with OK without
using the list function.
Press the OK key to transfer your des-
!
tination into the route calculation me-
nu.
Note:
If two words have to be entered, these
should be separated by a "_" character.
Using the list of towns
If you have already entered some of the
letters of the town you want, you can use
the List function to display all the towns
containing the combination of letters in
question.
6047
! Press the key on the bottom
5021
edge of the screen to call up the list of
towns.
! A town is selected by pressing the cor-
responding button.
Navigational mode
Selecting the street
In the destination street area, the street
and building number can be entered se-
parately using a letter and numerical key
panel. A possible street is displayed each
time a new letter is entered.
Traffic Assist Highspeed II rules out all
impossible combinations of letters and
only activates those letter boxes which
will produce an existing street.
A building number can only be selected
once the street has been selected and/or
if building numbers are also present in
the data.
Press the letters of the destination
!
street one another another.
38