Caller Display (Network Dependent) - AEG Voxtel S100 User Manual

20
8.8 Set the fast dial numbers
Up to 8 of your contact entries can be allocated to a fast dial key (from 2
to 9), where you can dial the number from idle mode by simply pressing
and holding the appropriate digit key for more than 2 seconds. If no fast
dial number is stored, you will hear a double-beep tone when the key is
held down.
8.8.1 Add or edit the fast dial number
Press to show "CONTACTS" and then press
list.
OK
Press and
OK
Press and
set. Then press
>If "EMPTY" is displayed briefly, there is no number stored in the
selected key:
Press / to select an entry from the contacts list.
OK
Press to save the new number in the selected fast dial key.
>If a name is displayed, there is already a number stored in the selected
key.
OK
Press to select "EDIT".
OK
Press and then
OK
Press to save the new number in the selected fast dial key.
8.8.2 Delete a fast dial number
Repeat the steps 1 to 3 in section "8.8.1 Add or edit the fast dial
number" .
Press and
OK
Press to confirm the delete.
9

CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed the caller line identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the call log. The number will
be shown on the screen when the phone is ringing.
If the number matches with one of the entries in your contacts list, the
caller's name stored in the contact list will be displayed alternately with
the number and the handset will ring with the ring tone associated with
that contacts entry.
/ to select "FASTDIAL".
/ to show the digit key from 2 to 9 that you want to
OK
to select it.
/ to select an entry from the contacts list.
/ to select "DELETE".
OK
to enter the contacts