Caller Display (Network Dependent) - AEG Prism 15 Quick User Manual

9.2 Handset Settings
9.2.1 Alarm
You can use this phone to set an alarm clock. When an alarm is
set, <ALARM ICON> displays on the LCD. When the alarm time is
reached, the <ALARM ICON> and "ALARM ON" flash on the screen.
The handset also rings for 45 seconds.
M
• Press and
M
• Press and
M
• Press and
M
• Press to confirm.
9.3 Register a Handset
Your handset is pre-registered to the base station. Up to five handsets
can be registered to a a single base station.
If for some reason, the handset is not registered to the base station,
REGISTER will be displayed on the handset screen, register your
handset following the process below.
• Press and hold on the base station for about five seconds, the base
station is entered into registration mode.
M
• Press and
M
• Press and you are requested to enter the 4-digit system PIN.
• Enter the 4-digit system PIN and press
NOTE
If the handset registration is successful, the handset will automatically
be allocated the next available handset number. This handset number
is shown in the handset display in standby mode.
10

CALLER DISPLAY (NETWORK DEPENDENT)

10.1 Call List
This feature is available if you have subscribed to the Caller Line
Identification service from your telephone company. Your phone can
store up to 50 received calls with date/time information in the Call List.
The number will be shown on the LCD when the phone is ringing. If the
.
to select HS SETTINGS.
.
to select ALARM.
.
to select ON or OFF.
.
to select REGISTRATION.
M
to confirm.
15